ENDLESS SLINGS
Rope Diameter ø |
Single vertical | Loop | Vertical double | 30º | 45º | 60º |
 |
 |
 |
 |
|||
| [mm] | [t] | [t] | [t] | [t] | [t] | [t] |
| 9,50 | 2,10 | 1,50 | 4,20 | 3,60 | 2,90 | 2,10 |
| 11,00 | 2,80 | 2,10 | 5,60 | 4,80 | 3,90 | 2,80 |
| 13,00 | 3,80 | 2,90 | 7,60 | 6,70 | 5,40 | 3,80 |
| 14,00 | 4,50 | 3,40 | 9,00 | 7,80 | 6,30 | 4,50 |
| 16,00 | 5,90 | 4,40 | 11,8 | 10,1 | 8,30 | 5,90 |
| 19,00 | 8,20 | 6,20 | 16,4 | 14,2 | 11,6 | 8,20 |
| 22,00 | 11,0 | 8,30 | 22,0 | 19,1 | 15,6 | 11,00 |
| 26,00 | 15,4 | 11,6 | 30,8 | 26,7 | 21,8 | 15,4 |
| 28,00 | 17,9 | 13,4 | 35,8 | 30,9 | 25,3 | 17,9 |
| 32,00 | 23,4 | 17,5 | 46,8 | 40,5 | 33,0 | 23,4 |
| 35,00 | 27,9 | 20,9 | 55,8 | 48,3 | 39,5 | 27,9 |
| 38,00 | 33,0 | 24,7 | 66,0 | 57,1 | 46,6 | 33,0 |
| 44,00 | 44,1 | 33,1 | 88,2 | 76,4 | 62,4 | 44,1 |
| 51,00 | 59,0 | 44,3 | 118 | 102 | 83,6 | 59,0 |
| 57,00 | 73,0 | 54,5 | 146 | 126 | 103 | 73,0 |
| 63,5 | 87,0 | 65,0 | 174 | 150 | 123 | 87,0 |
| 69,90 | 105 | 79,0 | 210 | 182 | 149 | 105 |
| 76,2 | 125 | 93,6 | 250 | 216 | 176 | 125 |
| 82,00 | 144 | 108 | 288 | 250 | 204 | 144 |
| 88,9 | 170 | 127 | 340 | 294 | 240 | 170 |
| 102,00 | 203 | 152 | 406 | 351 | 287 | 203 |
The endless sling is marked at the point where the cord ends are inserted into the sling to form the locking section. This area must not be bent or used over hooks, shackles, or similar hardware during lifting operations.
Information included in the table must be considered with the following technical specifications:
Wire ropes constructions: 6x19, 6x36 and 6x61, steel core, 1960 N/mm² grade.
Design Factor 5:1.
D/d Ratio > o = 5 (D: ø bolt, d: ø wire rope).
Minimum Perimeter: 100 times the wire rope’s diameter.
For other products not specified in the charts, please contact IPH.
